PS Engineering PAR200B Audio Panel with Remote Comm

The PAR200B is a full featured audio selector panel with a 4-place stereo IntelliVox® (completely automatic VOX system) intercom and Bluetooth® interconnectivity. The VHF radio is remotely mounted to minimize the amount of panel space required. It also includes a built-in 10 Watt Speaker Amplifier.

Remote Comm Transciever

The remote Trig TY91L com radio has a proven history of reliability.  The radio produces 6 watts of output power and has selectable 8.33KHZ or 25KHZ spacing.  It has excellent radio selectivity and AGC specifications that makes both transmit and receive audio punch right through. Clear radio communications has been the trademark of Trig Avionics, LTD. The radio also has automatic radio squelch which assures that the radio trip level is always optimally set. 

 

Bluetooth® and Connectivity

And to add flexibility, we have included our highly lauded  Bluetooth® technology. Pairing of phones or Bluetooth® enable audio devices is easily achieved for wireless entertainment. Telephone calls can be distributed in three different ways (as determined by the ICS switch). The pilot can make a private phone call, the crew can make a call, or all on board can be in on the conversation. 

There are two different music inputs and two types music distribution. The standard configuration allows music 1 (or Bluetooth®) to go to the crew while the passengers hear music 2. The other selection allows music 1 (or Bluetooth®) to go to all headsets. 

Other Features

Up to 5 discrete radio frequencies can be stored in non-volatile memory for quick dial up as well as being able to swap from and Com 1 to Com 2 by way of a yoke mounted switch. 

All installing hardware for the audio panel and radio are included. Microphone and Headphone jacks are not included.

The PAR200B has fully independent power supplies so you can power down the radio or audio panel individually. And if you have a  second Com or Navcom,  you can use it as Com 1 and use our remote radio as Com 2.

The PA200B uses the same tray and connector as the GMA240, GMA340, GMA345 or PMA8000 series. However, there is additional wiring that is required to interface the Com Radio to the audio panel.